ZENTRIFIX ELASTIC

Flexible membrane forming waterproofing and protection slurry

Zentrifix-elastic is a two-component mineral based; polymer modified waterproofing and concrete protection system. It is best suited for specialized structures like dams, bridges, culverts, tunnels and hydraulic structures where the water pressures are high, as also for normal waterproofing requirement of terraces, parking structures, basements, swimming pools, sanitary areas etc. When two components are mixed and applied, the film formed is a thick elastic membrane with excellent waterproofing properties and chemical resistance. It is most suitable for protection from chloride attacks. The component Zentrifix-elastic is a cement bound mineral modified mortar of proper grading.  The second component Emceflex 15 is an acrylic polymer based emulsion.  The crack-bridging is about 0.7 mm in normal application thickness.  Additional coats increase the crack bridging characteristics.

For Application, the liquid component should be emptied into a clean mixing vessel and the powder slowly added to it, while mixing with a slow speed-mixing paddle (approx. 400 rpm) until a consistent, lump free homogeneous mass is produced. The mixing ratio is approximately 100 parts by weight of powder to 50 parts by weight of liquid. Zentrifix-elastic can be applied by trowel or brush.  Before application the surface should be slightly moist but not wet. The first coat should be carefully worked into the surface by brush in order to close the pores. Allow three to four hours before the next coat.  The final coat should be finished with a steel trowel. Consumption is 1.7 kg / m² / mm thickness.

MC-Bauchemie (India) Pvt. Ltd. Manufactures this product alongwith a host of other Construction Chemicals in technical and financial collaboration with MC-Bauchemie, Germany. MC-Bauchemie (India) Pvt. Ltd. isan ISO 9001 : 2008 certified Company.